IonPlus: The Pinnacle of Performance and Design
The IonPlus also offers the DARC cleaning system that automatically cleans your water ionizer for optimal performance. Plus, the IonPlus automatically adjusts ionization to your source water with an advanced MICOM system. This insures you’ll get just the right level of ionization for whatever your needs.
Worried about heavy metals, fluoride, chlorine, leftover pharmaceutical drugs and other contaminants in your drinking water? The IonPlus takes care of all of it! It uses an 11 stage advanced filtration system, which includes super ceramic, anion ceramic, and anti-bacterial ceramic for removing the most difficult contaminants. It also includes activated carbon, carbon block, and a sediment filter for getting the bigger contaminants out. The result is you get a fresh glass of alkaline ionized water every time!
The Undersink Water Ionizer Faucet
We really listened to consumers when designing the new IonPlus Undersink Water Ionizer. The biggest complaints for previous models were that the faucets were too small, the arms didn’t swivel, they were made of plastic, and the controls were hard to use. With the IonPlus, you’ve got a faucet tall enough to put a large pot underneath it. It’s also made out of stainless steel so that it is easy to clean and beautiful to look at. The top arm of the faucet extends well into your sink and swivels the entire length of your sink, making it easy to wash with the acidic water or cook with the alkaline water. The buttons are also easy to understand and push so even children and the elderly will have no problem using and enjoying the IonPlus.
Simple to Use Controls
The controls on the IonPlus Undersink Water Ionizer are simple to use. There is an alkaline button, an acid button, and an on/off button. If you want water, you press the on/off button. You use the alkaline or acid water button to choose which pH level of water you want. Alkaline 3 is the recommended drinking water level because it creates a glass of water similar to what you’d find in a pristine spring or glacial stream. Alkaline 4 is the super-alkaline water button. You use super-alkaline water for cooking. It can neutralize oil-based stains so it can get the oil-based pesticides off of your fruits and vegetables. The acid water button can create two levels of acidic water. The acid 1 level is a mildly acidic water used for watering houseplants and spritzing on your face. The acid 2 level is a super acidic water that you can use to kill bacteria and viruses. Simply fill up a spray bottle and spritz super-acidic water around your kitchen and bathroom and you will keep it sterile without needing to use harsh chemicals.
The IonPlus offers an patented filtration system designed to give you a fresh and delicious glass of alkaline ionized water every time. First the water passes through a sediment filter to get the large particles of of your water, then it goes to activated carbon to remove chlorine, bacteria, and other common contaminants. Next, the water goes through a series of three ceramic filters each designed to target specific and difficult to remove contaminants such as heavy metals, fluoride, chloramine, and even leftover pharmaceutical drugs. The end result is 99.99% pure drinking water ready to be ionized!
Easy to Install
The IonPlus Undersink Water Ionizer is easy to install. First, you need a 1.25 inch hole, which is the same size as the utility holes that are a part of most stainless steel sinks. Often times these utility holes will have a soap dispenser or a sprayer already installed in them, which you will have to remove.
Once you have your hole clear, you can drop in the IonPlus faucet. A stainless steel stem will drop down into the hole. You use the provided nut to screw up the stem and tighten the faucet to your countertop.
Under your sink, you need to locate your cold water line spigot and turn off the water by turning the knob to the left. Next, you remove the 3/8 or 1/2 inch hose that’s attached to the spigot by unscrewing it. Next, take the cold water line diverter valve provided with your IonPlus and screw it into the cold water spigot. Then screw in the hose to the other side of the cold water line diverter valve so that it is installed between the hose and the spigot.
Next, attach the tube to the cold water line diverter valve by pushing it in and attach the other end to the WATER INPUT under the IonPlus base. Finally, attach the tubes between the base and the faucet and also the communication cable and you’re all set!
Typical installation time is 20 minutes. If you need to drill a hole using a carbide saw, then factor in another 15 minutes. Most customers do not need plumbers to install the IonPlus.
Below are the specifications of the new IonPlus Water Ionizer. It doesn’t use as much power as our other models but still provides the same powerful ionization. When we tested the IonPlus in comparison with the Revelation 2, the stength of ionization was almost the same. There are 4 alkaline levels and 2 acidic levels for you to choose from. It runs on 110V and is not convertible to 220V like the Revelation 2. It weighs about 15 pounds all together.
Product Photo Gallery