1. Where the plates in your water ionizer are made is very important. As water ionizers gained in popularity, there have been many counterfeit water ionizers on the market. These counterfeit water ionizers use plates that don’t contain pure metal. For example, they will use platinum that is combined with other metals. And for the core of the plate, they will find the titanium with iridium and other cheap metals. They will also make the place very very thin so that they will wear out within a short of time. These plates usually made in China can be dangerous to your health because some of those toxic metals can get into your drinking water. So be very wary of any water ionizer made in China or any other country where there isn’t strict standards for getting approval from their Food and Drug Administration and other regulatory agencies.
EOS plates are made by the Hee Sung metal company of Japan, which is the top rated company in the whole world for making platinum titanium plates. EOS plates are large, thick, and have a slotted plate design. the slotted plate design distributes the electrical current evenly across the plates so that there are no hot spots that will eventually break down the plates. we believe that these plates are the safest place in the world and ionized the water the best.
2. When comparing water ionizers, filtration is very important. Some of the most expensive water ionizers like the Natick sd501 only use a small carbon filter to filter your water. An activated carbon filter is good at removing bacteria and chlorine but it fails to remove heavy metals, flouride, chloramine, and even leftover pharmaceutical drugs. Vos filters offer 16 stages of filtration spread across two filters. These filtration stages include activated carbon, cinnamon, ceramic, antifungal felt, and most importantly ion exchange resin. The ion exchange resin will remove the fluoride and heavy metals and leftover pharmaceutical drugs from your water and make it much safer to drink. Only EOS water ionizers offer the ion exchange resin in their filters.
3. Also when comparing water ionizers, you have to compare the water ionizer manufacturer. Mini water ionizer manufacturers do not make their own parts. Instead they buy a design from a research and development company, and then they buy the parts for that design from other manufacturers. Finally, they put the parts together into a water ionizer and put their name on it as the manufacturer. This method of making water ionizers is very problematic. The first problem is when the assembler by the design the design is going to be outdated. So you’re not getting a top of the line water ionizer. Secondly, an assembler will buy a large run of parts from the manufacturer that supplies their parts. this will enable them to offer a low price on their water ionizers initially. But a few years down the road, when people need repairs on their water ionizers, it will be very difficult for an assembler to offer them parts that are inexpensive. Repair cost on the Water Ionizers will be very high if they can be repaired at all.
There are many other factors that you can consider when comparing water ionizers. We have written a full report on our website, just click on this link. And, as always, if you have any questions feel free to call us at 877 – 255 – 3713.
To your health!
